Honda automobile, Owner'S Manual

Page: 154 / 353

− − The SCAN function
samples all stations with strong
signals on the selected band. To
activate it, press the SCAN button or
touch the SCAN icon (models with
navigation system), then release it.
You will see SCAN in the display.
The system will scan for a station
with a strong signal. When it finds
one, it will stop and play that station
for about 10 seconds.
If you do nothing, the system will
then scan for the next strong station
and play it for 10 seconds. When it
plays a station you want to listen to,
press the SCAN button (icon) again.
The preset frequencies may be lost if
your vehicle’s battery goes dead, is
disconnected, or the radio fuse is
removed.
Each of the six preset
buttons or preset icons (on models
with navigation system) can store
one frequency on AM (LW, MW)
and two frequencies on FM.
Select the desired band, AM or
FM. FM1 and FM2 let you store
two sets of FM frequencies with
the preset buttons (on-screen
icons).
Push the AUDIO DISPLAY button
to view the audio display. You will
see the six preset icons.
Repeat steps 2 to 4 to store a total
of each six stations on AM (LW,
MW) and twelve stations on FM.
Pick a preset button (icon), and
hold it until you hear a beep.
Use the tune, seek, or scan
function to tune the radio to a
desired station.
5.
1.
2.
3.
4.
On vehicles with navigation system
CONTINUED
SCAN Preset
Audio System
Features
151
06/10/30 17:02:10 32SJD620_154