Honda automobile, Owner'S Manual

Page: 170 / 353

− ＋
−
To load a single CD:
Press and release the LOAD
button.
You will see ‘‘BUSY’’ in the display.
The CD load indicator turns red
and blinks. Then, the green CD
load indicator comes on. When
you see ‘‘LOAD’’ in the display,
insert the disc into the CD slot.
Insert it only about halfway; the
drive will pull it in the rest of the
way.
Select the CD changer by pressing
the CD/AUX button. The system will
begin playing the last selected disc in
the CD changer. You will see the
disc and track numbers displayed.
To select a different CD when all six
positions are loaded, use the preset 5
(DISC
) or preset 6 (DISC )
button. Otherwise, press the
corresponding number on the preset
buttons. On models with navigation
system, you can also touch the
appropriate disc icon (1
6) or CH
DISC button to select a different CD.
You can use the SKIP bar while a
disc is playing to select passages and
change tracks.
To move rapidly within a track, press
and hold the left or right of the SKIP
bar. You will hear a beep and the
system will continue to move
through the track. Press
to
move forward, or to move
backward. Release the bar when the
system reaches the point you want.
Each time you press and release the
side of the SKIP bar, the
system skips forward to the
beginning of the next track. Press
and release the
side to skip
backward to the beginning of the
current track.
If you press the LOAD button while
a CD is playing, the system will stop
playing that CD and start the loading
sequence. It will then play the CD
just loaded.
1.
2.
To Play a CD
Audio System
Features
167
06/10/30 17:04:09 32SJD620_170