Honda automobile Owner'S Manual Download Page 212 | Manualshive

Page: 212 / 353

background image

−

Press the D3 switch on the side of
the shift lever to turn this mode on
or off; the D3 mode indicator comes
on whenever the D3 mode is
selected.

When the D3 mode is on, the
transmission selects only the first
three gears. Use D3 mode when
towing a trailer, or to provide engine
braking when going down a steep hill.
D3 mode can also keep the
transmission from cycling between
third and fourth gears in stop-and-go
driving.

Shifting out from the D position will
cancel the D3 mode, and the D3
indicator will go out. Selecting the D
position again will resume the D3
mode and the indicator comes on.

Turning the ignition switch to the
LOCK (0) position turns this mode
off. When you restart the engine,
select the D position and press the
D3 mode switch again to use this
mode.

The D3 mode indicator also comes
on for a few seconds when you turn
the ignition switch to the ON (II)
position.

To shift to second,

press the release button on the side
of the shift lever. This position locks
the transmission in second gear. It
does not downshift to first gear
when you come to a stop.

D3 mode can be turned on or off
only when the ignition switch is in
the ON (II) position and the shift
lever is in the D position.

CONTINUED

D3 Mode

Second (2)

Automatic Transmission

Driving

209

D3 SWITCH

D3 MODE INDICATOR

06/10/30 17:09:47 32SJD620_212

«
...
210
211
212
213
214
...
»

Summary of Contents for automobile


































































































































































































































































































































































Reviews:

No comments

Related manuals for automobile

Brand: AA Products Pages: 8

Brand: Jeep Pages: 673

CARPOWER CAP-12XHQ

Brand: Monacor Pages: 5

Grand Cherokee WK2

Brand: Jeep Pages: 338

DAF CHARGEMAX 90

Brand: Paccar Pages: 40

1506-PHX Cargo Plus

Brand: Ranger design Pages: 8

Brand: AUTOTECH Pages: 1

Brand: Curtis Pages: 6

Brand: Honda Pages: 268

Brand: Xingyun Pages: 74

Brand: Honda Pages: 4

Brand: Pet Gear Pages: 4

1953 Traction Avant

Brand: CITROEN Pages: 26

Brand: iQOS Pages: 4

Brand: Volvo Pages: 18

ChargePoint CT500-DSTAND

Brand: Coulomb Technologies Pages: 26

Brand: Volvo Pages: 286

Brand: Curtis Pages: 5

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands