136
....... ............... ........
5-87b
5-89
5-88
5-90
5-91
8
8
8
Operation
Figure 5-87b
MINIMISATION “
3
”
Rotate the wheel into marking position following the
arrows.
In this position
mark
the tyre, on the outer side of
the wheel, precisely above the chuck.
Confirm by pressing key
8
.
The MINIMISATION “4” screen appears (
Fig. 5-88
).
Figure 5-88
MINIMISATION “
4
”
On the tyre changer, turn the tyre with respect to
the rim until the valve is aligned with the mark made
on the tyre.
Confirm by pressing key
8
.
The MINIMISATION “5” screen appears (
Fig. 5-89
).
Figure 5-89
MINIMISATION “
5
”
Clamp the wheel.
Rotate the wheel until the valve is exactly
perpendicular to and above the chuck.
Confirm the valve position by pressing key
8
.
The MINIMISATION “6” screen appears (
Fig. 5-90
).
Figure 5-90
MINIMISATION “
6
”
START is signalled on the screen
Perform the wheel measuring run.
A measuring run is performed.
The MINIMISATION “7” screen, outside, is displayed
(
Fig. 5-91
)
or the MINIMISATION “7” screen, inside,
appears (
Fig. 5-93
).
Indication H 0
Optimum condition has been achieved and cannot be
further improved.
Continue as shown on screen BALANCING (
Fig.
5-83
).
....... ........
Summary of Contents for Geodyna 8200 Series
Page 188: ...188 Blank Page ...
