Hofmann Geodyna 8200 Series, Operation Manual

Page: 68 / 196

68
5-15b
5-15a
4-5
1
2
3
4
4-6
Operation
5.6 Data detection mode
5.6.1 Selections by the User
For adequate rounded results and for a correct
application of thresholds, select, before the measuring
run:

the operating mode ( Fig. 5-15a ).

The Type of Vehicle before the measuring run. ( Fig.
4-5 )
5.6.2 Selecting the Type of Vehicle

In INTRO SCREEN page ( Fig. 5-15b ). Select the
TYPE of VEHICLE Item according to the rim. ( Fig.
4-5 )
When the selection has been made, the Type of
Vehicle in use identification icon will be displayed in
the Information Field .
Fig. 4-5: Assignation of Types of Vehicle Items:
1 Standard vehicle wheel (car)- nominal dimensions in
inches
. The measuring unit (
inches
) is displayed.
Normal and Alu 1 to Alu 5 weight positioning can
be selected.
Note
: When operating on standard Vehicle wheels
with nominal dimensions in millimetres (e.g. TD
or
TRX
wheels), once the RIM DATA ENTRY
screen has been displayed ( Fig. 4-6 ), press on
the rim
Diameter
or
Width
values to change the
measuring unit to millimetres.
2
SUV vehicle wheel - nominal dimensions in
inches
.
The threshold value for suppression of minor
unbalances is automatically doubled when this type
is chosen.
3 Light industry vehicle wheel (Van) - nominal
dimensions in inches . The threshold value for
suppression of minor unbalances is automatically
doubled when this type is chosen.
4 Motorcycle wheel - nominal dimensions
in
inches
, with imbalances resolved and
suppressed in the same way as car wheels.
(Selection available only in Manual Mode).
....... ........