Hofmann ATC 900, Service Manual

Page: 69 / 120

CTC-CEN Service Manual 07-13 Rev.E
69

Release the pipe strain relief and remove them from pipes protection. Then remove the protection from the
bracket.

Remove the pipes from the protection.

Route the new pipes through the protection.

Fit the pipes protection to the bracket with the pipes strain reliefs.

Plug the pipes to the cylinders and to fittings.

Plug the machine to the air pressure and to the power supply.

Extend the horizontal completely and adjust the length of the pipes.

Secure the pipes tightening the strain reliefs.

Slide in and out the arm to make sure that pipes are moving inside of their protection.

Mount the plastic covers of the cylinders.