CTC-CEN Service Manual 07-13 Rev.E
22
Turn half of a turn the spacer #3 and check if it is in the correct position.
Press the pedal all way down and make sure that switch has already switched to the second step before the
pedal has reached the end of stroke.
Push the pedal all way up and make sure that switch that the switch engages before the back side of the pedal
touches the pedals support
TO REPLACE THE SWITCH:
Loosen the screw that hold the switch lever.
Summary of Contents for ATC 900
