CTC-CEN Service Manual 07-13 Rev.E
56
Turn the switch of the valve to block the vertical rod of the
operating arm.
Check if the cylinder is leaking air in between cylinder liner and
seal.
TO REPLACE THE CYLINDERS:
Disconnect air pressure and power supply from machine.
Disconnect the pipe from the cylinder.
Unlock the cylinder adjustment screw and remove the washer.
Remove the upper adjustment screws and the two screws with
springs.
Summary of Contents for ATC 900
