CTC-CEN Service Manual 07-13 Rev.E
108
Service-Bulletin
No. SB 921 TC
24-Jan-13
Models affected: monty 8600 – John Bean Centaur – Boxer Vulcan Pro – ATC900
Starting from s/n:
Subject:
Procedure to adjust bead breaker disks alignment –
Ausrichtung der Abdrückscheiben
ENGLISH
In case of complaints related to bead breaker disks misalignment out of the maximum tolerance allowed,
1mm/0,04”, we would like to inform you that it is now available the following procedure to correct the output analog
value of the potentiometer/s improving the bead breaker disks alignment accuracy.
PROCEDURE:
15. Fix to the multimeter terminals two small crocodiles style ones.
16. Remove the cover from the bead breaker arm potentiometer.
17. Select the multimeter in Vdc.
18. Position the red crocodile to the green wire and the
black one on the white wire of the potentiometer.
19. Turn the machine on.
20. Move the bead breaker arms to maximum error point.
Summary of Contents for ATC 900
