CTC-CEN Service Manual 07-13 Rev.E
61
7.16 WHEEL LIFT VALVE # EAA0349G00A: CHECK AND REPLACEMENT
:
30’
: 8 and 10mm end key, 3mm allen key, pliers.
: Defective control valve may cause the following malfunction:
1.
Air leaking from the valve.
2.
Lift will not lift the wheels.
3.
Wheel lift does not hold the wheels.
4.
Wheel lift lower itself after releasing the pedal.
TO CHECK THE CONTROL VALVE:
Remove the valve cover.
Check the valve according to paragraph 7.13.
If there is not any air leaking from fitting and pipe but it is leaking from the air silencer, the valve must be
replaced.
TO REPLACE THE CONTROL VALVE:
Unplug the machine from air pressure and power supply.
Remove the nut and the pin split.
Remove the connecting rod and the unscrew the bolts to release
the valve from the support.
Unplug the air pipes from the valve.
Summary of Contents for ATC 900
