HNC Electric HV590 Series, User Manual

Page: 49 / 192

Section IV. Keyboard Operation
35
4.3.6 Motor parameter automatic tuning
Vector control running mode
：
before running, user must accurately input motor nameplate
parameters. HV590 series inverter will be matching standard motor parameter according to this
nameplate. Vector control methods are very much dependent on motor parameters, to get good
control performance, accurate control motor parameters must be acquired.
Motor parameter auto tuning procedure is as follows
：
Firstly, select command source(P0.02) as operation panel command channel.Secondly,
input parameters below in accordance with motor actual parameter
：
Motor selection Parameter
Motor 1
P1.00
：
Motor type selection P1.01
：
Motor rated power
P1.02
：
Motor rated voltage P1.03
：
Motor rated current
P1.04
：
Motor rated frequency P1.05
：
Motor rated revolving speed
Motor 2
A2.00
：
Motor type selection A2.01
：
Motor rated power
A2.02
：
Motor rated voltage A2.03
：
Motor rated current
A2.04
：
Motor rated frequency A2.05
：
Motor rated revolving speed
Motor 3
A3.00
：
Motor type selection A3.01
：
Motor rated power
A3.02
：
Motor rated voltage A3.03
：
Motor rated current
A3.04
：
Motor rated frequency A3.05
：
Motor rated revolving speed
Motor 4
A4.00
：
Motor type selection A4.01
：
Motor rated power
A4.02
：
Motor rated voltage A4.03
：
Motor rated current
A4.04
：
Motor rated frequency A4.05
：
Motor rated revolving speed
Table 4-3.4
E.g
：
Asynchronous motor parameter tuning
If motor and the load can be totally separated, please select P1.37(Motor 2\3\4 as
A2\A3\A4.37) to 2(Asynchronous machine complete tuning), then press RUN key on keyboard
panel, inverter will automatically calculate the motor of the following parameters
：
Motor selection Parameter
Motor 1
P1.06
：
Asynchronous motor stator resistance
P1.07
：
Asynchronous motor rotor resistance
P1.08
：
Asynchronous motor leakage inductance
P1.09
：
Asynchronous motor mutual inductance
P1.10
：
Asynchronous motor no-load current
Motor 2
A2.06
：
Asynchronous motor stator resistance
A2.07
：
Asynchronous motor rotor resistance