HNC Electric HV590 Series, User Manual

Page: 15 / 192

1
Section I. Product Information
HNC frequency inverters have been tested and inspected before leaving the manufacturer.
Before unpacking the product, please check product packaging for shipping damage caused by
careless transportation and whether the specifications and type of the product complies with the
order. If any questions, please contact the supplier of HNC products, or directly contact the
company.
※
Inspect that the contents are complete (one unit of HV590 frequency inverter, one
operation manual).
※
Check the nameplate on the side of the frequency inverter to ensure that the product you
have received is right the one you ordered.
1.1 Nameplate specification
1.2 Model specification
HV590 – R75 G 3
Inverter Series No. Voltage
1
Single-phase
220V
No. Adaptation
2
Three-phase
220V
R75 0.75kW 3
Three-phase
380V
1R5 1.5kW 4
Three-phase
480V
011 11kW
018 18.5kW
No.
Inverter Type
110 110kW G
General type
400 400kW P
Fan pump type
GP unification
Model
description
Users check factory models through P0.00. P type is one lower power than G type.
E.g
：
If you need 11kw P type, 7.5kw G type could be selected as a replacement. Its input
current is the rated input current (20.5A) of 7.5kw G type, but its rated power is that of 11kw
G type, and output current is the rated output current(25A) of 11kw G type.
Though inverter hardware of GP unification is different, there are some optimizations of
software parameters for different load types .
P type model is only suitable for pump, fan etc light load models, can not work at the rated
current or more than the rated frequency for a long time.