HNC Electric HV590 Series, User Manual

Page: 168 / 192

163
Appendix II Parameter Settings List
P1.30 ABZ incremental encoder AB phase 0
P1.31
Encoder installation angle 0.00
P1.32 UVW phase sequence 0
P1.33 UVW encoder offset angle 0.00
P1.34 Rotary transformer pole pairs
1
P1.35 UVW pole-pairs 4
P1.36 PG dropped inspection time
0.0s
P1.37 Tuning selection
0
P2
Vector control function group
：
P2.00-P2.22
P2.00 Speed loop proportional gain 1
30
P2.01 Speed loop integration time1
0.50s
P2.02 Switching frequency1
5.00Hz
P2.03 Speed loop proportional gain 2
20
P2.04 Speed loop integration time 2
1.00s
P2.05 Switching frequency 2
10.00Hz
P2.06 Vector control slip gain
100%
P2.07 Speed-loop filter time
28
P2.08 Vector control over-excitation gain
64
P2.09 Torque upper limit source in speed control mode
0
P2.10
Torque upper limit digital setup in speed control
mode
150.0%
P2.13 Excitation regulation proportional gain 2000
P2.14 Excitation regulation integration gain 1300
P2.15 Torque regulation proportional gain
2000
P2.16 Torque regulation integration gain
1300
P2.17 Speed loop integration attribute
0
P2.18
Synchronous motor field weakening mode 1
P2.19
Synchronous motor field weakening depth 100%
P2.20 Maximum field weakening current
50%
P2.21 Field weakening auto regulation gain
100%
P2.22 Field weakening integration multiples
2
P3 V/F control group
：
P3.00-P3.15
P3.00 V/F curve setup 0
P3.01
Torque boost value
-