HNC Electric HV590 Series, User Manual

Page: 47 / 192

Section IV. Keyboard Operation
33
Relevant function parameters PP.02
、
PP.03
,
set as below
：
PP.02
Parameters display mode
attributes
Default
value
11
Set range
1bit U group display selection
0 No display
1 Display
10bit A group display selecton
0 No display
1 Display
PP.03
Individual parameter mode
display selection
Default
value
00
Set range
1bit User set parameter display selection
0 No display
1 Display
10bit User modify parameter display selection
0 No display
1 Display
Table 4-3.2
When there is 1bit display existing in the individual parameter mode display selection(PP.03),
you can enter different parameter display mode by pressing PRG+>>/SHIFT key at the same time.
Each parameter display codes
：
Parameter display mode Display
Function parameter mode-FunC
User set parameter mode -USEt
User modify parameter mode -U--C
Table 4-3.3
Switching mode as below
：
E.g
：
To switch current function parameter mode to user set parameter mode.
Fig. 4-3.3
4.3.3 User set parameter operation mode
User set menu is established for quick checkup and modification. The display mode is
“uP3.02”,which represents function parameter P3.02. It has the same effect of modifying
parameter in user set menu and normal programming state.
Function parameters of user set menu come from PE group.PE group chooses function
PRG+>>SHIFT ENTER