Hitachi P1-00041-H, Basic Manual

Page: 89 / 131

4-41
Chapter 4
For parameter configuration
[Output terminal function list]
Function
code
Symbol Function name Description
040 ZS
Zero speed
detection ON if output frequency is
less than set value
041 DSE
Speed deviation
over ON if speed deviation
exceeds the set value
042 PDD
Position deviation
over ON if position deviation
exceeds the set value
043 POK
Positioning
completed ON if positioning is
completed
044 PCMP
Pulse count
compare match
output ON when set value and
pulse train comparator
matches.
045 OD
Deviation over for
PID control ON if PID control deviation
exceeds the set value
046 FBV
PID1 feedback
comparison ON if PID feedback is
within range
047 OD2
OD:Deviation over
for PID2 control ON if PID control deviation
exceeds the set value
048 FBV2
PID2 feedback
comparison ON if PID feedback is
within range
049 NDc
Communication line
disconnection ON if communication is
lost with operation keypad
050 Ai1Dc
Analog [Ai1]
disconnection
detection
ON if Analog input 1 is less
than the set value
051 Ai2Dc
Analog [Ai2]
disconnection
detection
ON if Analog input 2 is less
than the set value
052 Ai3Dc
Analog [Ai3]
disconnection
detection
ON if Analog input 3 is less
than the set value
053 Ai4Dc
Analog [Ai4]
disconnection
detection
ON if Analog input 4 is less
than the set value
054 Ai5Dc
Analog [Ai5]
disconnection
detection
ON if Analog input 5 is less
than the set value
055 Ai6Dc
Analog [Ai6]
disconnection
detection
ON if Analog input 6 is less
than the set value
056 WCAi1
Window
comparator Ai2 ON if Analog input 1 is
within range
057 WCAi2
Window
comparator Ai2 ON if Analog input 2 is
within range
058 WCAi3
Window
comparator Ai3 ON if Analog input 3 is
within range
059 WCAi4
Window
comparator Ai4 ON if Analog input 4 is
within range
060 WCAi5
Window
comparator Ai5 ON if Analog input 5 is
within range
061 WCAi6
Window
comparator Ai6 ON if Analog input 6 is
within range
062 LOG1
Logical operation
result 1
Determined by the
calculation results of two
output terminals
063 LOG2
Logical operation
result 2
064 LOG3
Logical operation
result 3
065 LOG4
Logical operation
result 4
066 LOG5
Logical operation
result 5
067 LOG6
Logical operation
result 6
068 LOG7
Logical operation
result 7
[Output terminal function list]
Function
code
Symbol Function name Description
069 MO1
General-purpose
output 1
Set if case of use of EzSQ
070 MO2
General-purpose
output 2
071 MO3
General-purpose
output 3
072 MO4
General-purpose
output 4
073 MO5
General-purpose
output 5
074 MO6
General-purpose
output 6
075 MO7
General-purpose
output 7
076 EMFC
Bypass mode
indicator ON while in force
operation
077 EMBP
Speed deviation
over ON while in bypass
operation
078 WFT
Trace function
waiting for trriger
ON while in waiting status
079 TRA
Trace function data
logging
ON while in stand-by
080 LBK
Low-battery of
keypad
ON while in low battery or
when no contain battery
on keypad
081 OVS
Over-Voltage power
Supply ON when become
overvoltage in stop status
084 AC0 Alarm code bit-0 ON if detects low battery
Alarm information is
delivered as bit.
Use the user’s guide for
more information.
085 AC1 Alarm code bit-1
086 AC2 Alarm code bit-2
087 AC3 Alarm code bit-3
089 OD3
Deviation over for
PID control ON when PID deviation
exceeds the value [AJ-37]
090 FBV3
PID3 feedback
comparison ON when PID feedback is
between [AJ-38]/[AJ-39]
091 OD4
Deviation over for
PID4 control ON when PID deviation
exceeds the value [AJ-57]
092 FBV4
PID4 feedback
comparison ON when PID feedback is
between [AJ-58]/[AJ-59]
093 SSE PID soft start error
ON when PID soft start
became in warning status