Chapter 4
・
・
・
・
・
PID
Target
value
PID feedback (%)
048[FBV2]
Operation
command
Chapter 4
[AJ-13]
～
Code/Name
AJ-13
PID2 proportional gain
AJ-14
PID2 integral time constant
AJ-15
PID2 derivative gain
・
Sets the PID
・
If [PIDC] terminal
integral constant is purged.
operation can become
Code/Name
AJ-16
PID2 output
・
Limits the output range of the PID.
limit is disabled.
Code/Name
AJ-17
PID2 deviation over
・
When the PID deviation pass over
terminal function 04
Code/Name
AJ-18
PID2 feedback compare
signal turn-off level
AJ-19
PID2
signal turn-on level
・
When the PID
output terminal function 048[FBV2] is deactivated
(OFF). If it crosses
(ON)
.
PID output (%)
PID
Target
value
PID deviation (%)
0%
Output
terminal
047[OD2]
PID feedback (%)
0%
048[FBV2]
Operation
command
Chapter 4
～
[AJ-19]
Code/Name
PID2 proportional gain
PID2 integral time constant
PID2 derivative gain
ets the PID2 gain.
terminal is active (ON), the value of the
integral constant is purged.
operation can become instable
Code/Name
PID2 output variable
Limits the output range of the PID.
limit is disabled.
Code/Name
over level
When the PID deviation pass over
terminal function 047[OD
Code/Name
PID2 feedback compare
off level
feedback compare
on level
When the PID feedback cross over the [AJ
output terminal function 048[FBV2] is deactivated
crosses under the [AJ
PID output (%)
PID deviation (%)
ON
ON
]
Range (unit)
0.0
～
100.0
PID2 integral time constant
0.0
～
3600.0(s)
0.0
～
100.0(s)
is active (ON), the value of the
integral constant is purged. If done while operating, the
instable/insecure.
Range (unit)
0.00
～
100.00(%)
Limits the output range of the PID. If [AJ
Range (unit)
0.00
～
100.00(%)
When the PID deviation pass over ±[AJ
[OD2] is activated
Range (unit)
PID2 feedback compare
0.00
～
100.00(%)
compare
0.00
～
100.00(%)
cross over the [AJ
output terminal function 048[FBV2] is deactivated
under the [AJ-19] level, is activated
PID output range
ON
ON
ON
Range (unit)
Initial
value
100.0
1.0
3600.0(s)
1.0
100.0(s)
0.0
is active (ON), the value of the
If done while operating, the
/insecure.
Range (unit)
Initial value
100.00(%)
0.00
[AJ-16]=0.00 the
Range (unit)
Initial value
100.00(%)
3.00
J-17], the output
] is activated.
Range (unit)
Initial
value
100.00(%)
100.00
100.00(%)
0.00
cross over the [AJ-18] level, the
output terminal function 048[FBV2] is deactivated
19] level, is activated
Time(s)
[AJ-16]
PID output range
[AJ-16
]
Time(s)
[AJ-17]
[AJ-17]
Time(s)
[AJ-18]
[AJ-19]
4-26
Initial
value
.0
.0
0.0
If done while operating, the
Initial value
the
Initial value
the output
Initial
value
0.00
0.00
18] level, the
19] level, is activated
PID3 function
AJ
enable
・
Validates the PID3 operation.
・
If [AJ
value, the PID output is limited to 0.
・
If [AJ
value, the PID output l
・
By activating the [PID3] terminal, the PID3 output
becomes 0.
AJ
・
PID3 deviation can be reversed.
AJ
AJ
PID3 sc
AJ
PID3 scal
AJ
(decimal point)
・
You can switch the display data and the display unit
involved in the output of the
calculation.
AJ
of set
AJ
PID3
・
When PID3 target value input is selected, if the selected
is the parameter setting, [AJ
AJ
of process data
・
Selects the PID
*1)00(Not used)/01(Ai1 terminal)/02(Ai2 terminal)/03(Ai3 terminal)/
04(Ai4 terminal)/05(Ai5
08(RS485)/ 12(Pulse train input: main)/ 13(Pulse train input:
option)/15(PID1 output)
Time(s)
17]
PID
value
Feedback
value
For parameter configuration
PID3 function
Code/Name
AJ-21
PID3
enable
Validates the PID3 operation.
If [AJ-21]=01 when the PID output reaches a negative
value, the PID output is limited to 0.
If [AJ-21]=02 when the PID output reaches a negative
value, the PID output l
By activating the [PID3] terminal, the PID3 output
becomes 0.
Code/Name
AJ-22
PID3 deviation
PID3 deviation can be reversed.
Code/Name
AJ-23
PID3 unit selection
AJ-24
PID3 scale adjustment
AJ-25
PID3 scale adjustment
AJ-26
PID3 scale adjustment
(decimal point)
You can switch the display data and the display unit
involved in the output of the
calculation.
Code/Name
AJ-27
Input source selection
of set-point for PID3
AJ-30
set point setting for
PID3
When PID3 target value input is selected, if the selected
is the parameter setting, [AJ
Code/Name
AJ-32
input source
of process data for PID3
Selects the PID
00(Not used)/01(Ai1 terminal)/02(Ai2 terminal)/03(Ai3 terminal)/
04(Ai4 terminal)/05(Ai5
08(RS485)/ 12(Pulse train input: main)/ 13(Pulse train input:
option)/15(PID1 output)
PID target
value
Feedback
value
For parameter configuration
PID3 function
Range (unit)
00(Disable)/01(Enable)/
02(Enable:inverted output)
Validates the PID3 operation.
21]=01 when the PID output reaches a negative
value, the PID output is limited to 0.
21]=02 when the PID output reaches a negative
value, the PID output lets out an inverted output.
By activating the [PID3] terminal, the PID3 output
Code/Name
PID3 deviation inverse
PID3 deviation can be reversed.
Code/Name
PID3 unit selection
ale adjustment (0%)
e adjustment (100%)
e adjustment
You can switch the display data and the display unit
involved in the output of the
Code/Name
Input source selection
point for PID3
00
set point setting for
-100.00
When PID3 target value input is selected, if the selected
is the parameter setting, [AJ
Code/Name
input source selection
for PID3
00
Selects the PID3 feedback reference.
00(Not used)/01(Ai1 terminal)/02(Ai2 terminal)/03(Ai3 terminal)/
04(Ai4 terminal)/05(Ai5 terminal)/06(Ai6 terminal)/07(Parameter)/
08(RS485)/ 12(Pulse train input: main)/ 13(Pulse train input:
option)/15(PID1 output)
+
+
-
-
For parameter configuration
[AJ-21]
～
Range (unit)
00(Disable)/01(Enable)/
02(Enable:inverted output)
Validates the PID3 operation.
21]=01 when the PID output reaches a negative
value, the PID output is limited to 0.
21]=02 when the PID output reaches a negative
ets out an inverted output.
By activating the [PID3] terminal, the PID3 output
Range (unit)
00(Disable)/
01(Enable)
PID3 deviation can be reversed.
Range (unit)
<unit table> at the end
of the document can
be consulted
-10000
～
10000
-10000
～
10000
0
～
4
You can switch the display data and the display unit
involved in the output of the PID control by the
Range (unit)
00
～
08, 12, 13, 15 *1)
100.00
～
100.00(%)
When PID3 target value input is selected, if the selected
is the parameter setting, [AJ-30] gets enabled.
Range (unit)
00
～
08, 12, 13, 15 *1)
feedback reference.
00(Not used)/01(Ai1 terminal)/02(Ai2 terminal)/03(Ai3 terminal)/
terminal)/06(Ai6 terminal)/07(Parameter)/
08(RS485)/ 12(Pulse train input: main)/ 13(Pulse train input:
00
01
Reverse PID3
[AJ-22]
For parameter configuration
～
[AJ-30
Initial
value
00
21]=01 when the PID output reaches a negative
21]=02 when the PID output reaches a negative
ets out an inverted output.
By activating the [PID3] terminal, the PID3 output
Initial value
00
Range (unit)
Initial
value
<unit table> at the end
of the document can
03
10000
0
10000
10000
2
You can switch the display data and the display unit
PID control by the
(unit)
Initial
value
15 *1)
07
100.00(%)
0.00
When PID3 target value input is selected, if the selected
enabled.
Range (unit)
Initial
value
08, 12, 13, 15 *1)
02
00(Not used)/01(Ai1 terminal)/02(Ai2 terminal)/03(Ai3 terminal)/
terminal)/06(Ai6 terminal)/07(Parameter)/
08(RS485)/ 12(Pulse train input: main)/ 13(Pulse train input:
PID
operation
3
30]
Initial
10000
When PID3 target value input is selected, if the selected
Summary of Contents for P1-00041-H
Page 6: ...0 5 Contents Contents Memo ...
Page 42: ...2 26 Chapter 2 Installation and Wiring Memo ...
Page 129: ...Index Index 3 memo ...
Page 130: ...Index Index 4 memo ...
