Chapter 4
・
・
・
・
・
PID
Target
value
PID feedback (%)
048[FBV3]
Operation
command
Chapter 4
[AJ-33]
～
Code/Name
AJ-33
PID3 proportional gain
AJ-34
PID3 integral time
AJ-35
PID3 derivative gain
・
Sets the PID3 gain.
・
If [PIDC] terminal is active (ON), the value of the
integral constant is purged. If done while operating, the
operation can become instable/insecure.
Code/Name
AJ-36
PID3 output
・
Limits the output range of the PID. If [AJ
limit is disabled.
Code/Name
AJ-37
PID3 deviation
level
・
When the PID deviation pass over ±[AJ
terminal function 0
Code/Name
AJ-38
PID3 feedback
signal turn-off level
AJ-39
PID3 feedback
signal turn-on level
・
When the PID feedback cross over the [AJ
output terminal function 0
(OFF). If it crosses under the [AJ
(ON)
.
PID output (%)
PID
Target
value
PID deviation (%)
0%
Output
terminal
047[OD3]
PID feedback (%)
0%
048[FBV3]
Operation
command
Chapter 4
～
[AJ-39]
Code/Name
PID3 proportional gain
PID3 integral time constant
PID3 derivative gain
Sets the PID3 gain.
If [PIDC] terminal is active (ON), the value of the
integral constant is purged. If done while operating, the
operation can become instable/insecure.
Code/Name
PID3 output variable
Limits the output range of the PID. If [AJ
disabled.
Code/Name
PID3 deviation over
When the PID deviation pass over ±[AJ
terminal function 089[OD3] is activated.
Code/Name
feedback compare
off level
feedback compare
on level
When the PID feedback cross over the [AJ
output terminal function 0
(OFF). If it crosses under the [AJ
PID output (%)
PID deviation (%)
ON
ON
]
Range (unit)
0.0
～
100.0
constant
0.0
～
3600.0(s)
0.0
～
100.0(s)
If [PIDC] terminal is active (ON), the value of the
integral constant is purged. If done while operating, the
operation can become instable/insecure.
Range (unit)
0.00
～
100.00(%)
Limits the output range of the PID. If [AJ
Range (unit)
0.00
～
100.00(%)
When the PID deviation pass over ±[AJ
[OD3] is activated.
Range (unit)
compare
0.00
～
100.00(%)
compare
0.00
～
100.00(%)
When the PID feedback cross over the [AJ
output terminal function 090[FBV3] is deactivated
(OFF). If it crosses under the [AJ-39] level, is activated
PID output range
ON
ON
ON
Range (unit)
Initial
value
100.0
1.0
3600.0(s)
1.0
100.0(s)
0.0
If [PIDC] terminal is active (ON), the value of the
integral constant is purged. If done while operating, the
operation can become instable/insecure.
Range (unit)
Initial value
100.00(%)
0.00
Limits the output range of the PID. If [AJ-36]=0.00 the
Range (unit)
Initial value
100.00(%)
3.00
When the PID deviation pass over ±[AJ-37], the output
[OD3] is activated.
Range (unit)
Initial
value
100.00(%)
100.00
100.00(%)
0.00
When the PID feedback cross over the [AJ-18] level, the
] is deactivated
9] level, is activated
Time(s)
[AJ-36]
PID output range
[AJ-36
]
Time(s)
[AJ-37]
[AJ-37]
Time(s)
[AJ-38]
[AJ-39]
4-27
Initial
value
1.0
1.0
0.0
integral constant is purged. If done while operating, the
Initial value
6]=0.00 the
Initial value
37], the output
Initial
value
100.00
0.00
18] level, the
9] level, is activated
PID3 function
AJ
enable
・
Validates the PID
・
If [AJ
value, the PID output is limited to 0.
・
If [AJ
value, the PID output lets out an inverted output.
・
By activating the [PID
becomes 0.
AJ
・
PID
AJ
AJ
PID
AJ
PID
AJ
(decimal point)
・
You can switch the display data and the display
involved in the output of the PID control by the
calculation.
AJ
of process data for PID4
AJ
PID4
・
When PID
is the parameter setting, [AJ
AJ
reference selection for PID
・
Selects the PID
*1)00(Not used)/01(Ai1 terminal)/02(Ai2 terminal)/03(Ai3 terminal)/
04(Ai4 terminal)/05(Ai5 terminal)/06(Ai6 terminal)/07(Parameter)/
08(RS485)/ 12(Pulse train input: main)/ 13(Pulse train input:
option)/15(PID1 output)
Time(s)
37]
PID target
value
Feedback
value
For parameter configuration
PID3 function
Code/Name
AJ-41
PID4
enable
Validates the PID
If [AJ-41]=01 when the PID output reaches a negative
value, the PID output is limited to 0.
If [AJ-41]=02 when the PID output reaches a negative
value, the PID output lets out an inverted output.
By activating the [PID
becomes 0.
Code/Name
AJ-42
PID4 deviation
PID4 deviation can be reversed.
Code/Name
AJ-43
PID4 unit selection
AJ-44
PID4 scale adjustment
AJ-45
PID4 scale adjustment
AJ-46
PID4 scale adjsutment
(decimal point)
You can switch the display data and the display
involved in the output of the PID control by the
calculation.
Code/Name
AJ-47
Input source selection
of process data for PID4
AJ-50
Set point setting for
PID4
When PID4 target value input is selected, if the selected
is the parameter setting, [AJ
Code/Name
AJ-52
Feedback data
reference selection for PID
Selects the PID
00(Not used)/01(Ai1 terminal)/02(Ai2 terminal)/03(Ai3 terminal)/
04(Ai4 terminal)/05(Ai5 terminal)/06(Ai6 terminal)/07(Parameter)/
08(RS485)/ 12(Pulse train input: main)/ 13(Pulse train input:
option)/15(PID1 output)
PID target
value
Feedback
value
For parameter configuration
PID3 function
Range (unit)
00(Disable)/01(Enable)/
02(Enable:inverted output)
Validates the PID4 operation.
1]=01 when the PID output reaches a negative
value, the PID output is limited to 0.
1]=02 when the PID output reaches a negative
value, the PID output lets out an inverted output.
By activating the [PID4] terminal, the PID
Code/Name
deviation inverse
deviation can be reversed.
Code/Name
unit selection
adjustment (0%)
e adjustment (100%)
e adjsutment
You can switch the display data and the display
involved in the output of the PID control by the
Code/Name
Input source selection
of process data for PID4
00
Set point setting for
-100.00
target value input is selected, if the selected
is the parameter setting, [AJ
Code/Name
Feedback data
reference selection for PID4
00
Selects the PID4 feedback reference.
00(Not used)/01(Ai1 terminal)/02(Ai2 terminal)/03(Ai3 terminal)/
04(Ai4 terminal)/05(Ai5 terminal)/06(Ai6 terminal)/07(Parameter)/
08(RS485)/ 12(Pulse train input: main)/ 13(Pulse train input:
option)/15(PID1 output)
+
+
-
-
For parameter configuration
[AJ-41]
～
Range (unit)
00(Disable)/01(Enable)/
02(Enable:inverted output)
operation.
1]=01 when the PID output reaches a negative
value, the PID output is limited to 0.
1]=02 when the PID output reaches a negative
value, the PID output lets out an inverted output.
] terminal, the PID
Range (unit)
00(Disable)/
01(Enable)
deviation can be reversed.
Range (unit)
<unit table> at the end
of the document can
be consulted
-10000
～
10000
-10000
～
10000
0
～
4
You can switch the display data and the display
involved in the output of the PID control by the
Range (unit)
00
～
08, 12, 13, 15 *1)
100.00
～
100.00(%)
target value input is selected, if the selected
is the parameter setting, [AJ-50] gets enabled.
Range (unit)
00
～
08, 12, 13, 15 *1)
ck reference.
00(Not used)/01(Ai1 terminal)/02(Ai2 terminal)/03(Ai3 terminal)/
04(Ai4 terminal)/05(Ai5 terminal)/06(Ai6 terminal)/07(Parameter)/
08(RS485)/ 12(Pulse train input: main)/ 13(Pulse train input:
00
01
Reverse PID4
[AJ-42]
For parameter configuration
～
[AJ-50
Initial
value
00
1]=01 when the PID output reaches a negative
1]=02 when the PID output reaches a negative
value, the PID output lets out an inverted output.
] terminal, the PID4 output
Initial value
00
Range (unit)
Initial
value
at the end
of the document can
03
10000
0
10000
10000
2
You can switch the display data and the display unit
involved in the output of the PID control by the
Range (unit)
Initial
value
15 *1)
07
100.00(%)
0.00
target value input is selected, if the selected
0] gets enabled.
Range (unit)
Initial
value
08, 12, 13, 15 *1)
02
00(Not used)/01(Ai1 terminal)/02(Ai2 terminal)/03(Ai3 terminal)/
04(Ai4 terminal)/05(Ai5 terminal)/06(Ai6 terminal)/07(Parameter)/
08(RS485)/ 12(Pulse train input: main)/ 13(Pulse train input:
PID
operation
Reverse PID4
0]
Initial
10000
target value input is selected, if the selected
Summary of Contents for P1-00041-H
Page 6: ...0 5 Contents Contents Memo ...
Page 42: ...2 26 Chapter 2 Installation and Wiring Memo ...
Page 129: ...Index Index 3 memo ...
Page 130: ...Index Index 4 memo ...
