Hitachi HVM Navigator V03-06 User Manual Download Page 261

Page: 261 / 312

Usage notes

5-29

HVM Navigator User's Guide - Migration

In order to avoid inadvertent shutdown of HVM during migration of LPARs,

HVM Navigator suppresses the auto shutdown until the migration executed by
Migration functions is complete. By doing so, the HVM remains active even

during any scheduled migration where all LPARs on the HVM become

deactivated (power-off state) to save power or to execute scheduled
maintenance.

Similarly, migration of the last active LPAR does not automatically shut down

the HVM. If shutdown of the HVM is expected, this HVM needs to be manually
shut down after the migration.

Summary of Contents for HVM Navigator V03-06

























































































































































































































































































































Search results

Summary of Contents for HVM Navigator V03-06

Reviews:

Hitachi HVM Navigator V03-06, User Manual, Page: 261 / 312

Search results

Summary of Contents for HVM Navigator V03-06

Reviews: