Hitachi HVM Navigator V03-06 User Manual Download Page 154

Page: 154 / 312

3-58

Migration procedures

HVM Navigator User's Guide - Migration

New Policy window is displayed.
Input a name for a migration policy and then click OK button.

Input a memo in Comment text box in Policy Information as needed and

then click Add [Shutdown] button or Add [Concurrent Maintenance]

button.
When you add entries for Shutdown mode, click Add [Shutdown] button.

On the other hand, when you add entries for Concurrent Maintenance

mode, click Add [Concurrent Maintenance] button.
The following procedure is explained with the sample procedure to add

entries for Concurrent Maintenance mode. However, when you add entries
for Shutdown mode, you can add the entries in the same way.

Summary of Contents for HVM Navigator V03-06

























































































































































































































































































































Search results

Summary of Contents for HVM Navigator V03-06

Reviews:

Hitachi HVM Navigator V03-06, User Manual, Page: 154 / 312

Search results

Summary of Contents for HVM Navigator V03-06

Reviews: