Hitachi HVM Navigator V03-06 User Manual Download Page 175

Page: 175 / 312

Migration procedures

3-79

HVM Navigator User's Guide - Migration

•

You can restore an HVM configuration through an SC/BSM, the web

console for CB500, or the web console for CB2500. When you restore HVM

configuration, don't restore only either one on the source or destination
server blade. It may cause MAC address to be duplicated. So, absolutely

restore HVM configurations on the source and destination server blades

together.

•

You can find out that restoring HVM configurations have succeeded by

checking the following conditions are fulfilled.

–

There is an LPAR which has failed to be recovered on the source HVM.

–

The configurations on the above LPAR and the source HVM are the
same as the previous backed up configuration.

–

There isn't an LPAR which has failed to be recovered on the source

HVM.

–

The configuration on the destination HVM is the same as the previous

backed up configuration.

Summary of Contents for HVM Navigator V03-06

























































































































































































































































































































Search results

Summary of Contents for HVM Navigator V03-06

Reviews:

Hitachi HVM Navigator V03-06, User Manual, Page: 175 / 312

Search results

Summary of Contents for HVM Navigator V03-06

Reviews: