Hitachi HVM Navigator V03-06 User Manual Download Page 122

Page: 122 / 312

3-26

Migration procedures

HVM Navigator User's Guide - Migration

Scroll the horizontal bar to the right in Migration Path List group box.

Next, input an IP address in the IP address column and then input a subnet
mask in the Subnet Mask column.

Also, set at least one migration path for the source or destination HVM in

the same way as the way explained above.

Then, click Save button.

When you want to secure packets not to be referred to through another

network or isolate packets form those on another network, it's recommended
that VLANID is set for each migration path.

Summary of Contents for HVM Navigator V03-06

























































































































































































































































































































Search results

Summary of Contents for HVM Navigator V03-06

Reviews:

Hitachi HVM Navigator V03-06, User Manual, Page: 122 / 312

Search results

Summary of Contents for HVM Navigator V03-06

Reviews: