Hitachi HVM Navigator V03-06 User Manual Download Page 110

Page: 110 / 312

3-14

Migration procedures

HVM Navigator User's Guide - Migration

Event

When LPAR migration fails because of an error or cancelled because of
resource shortage or any other cause on the destination, an error message is

displayed in Migration Progress window and recovering LPAR is often executed

automatically. However, there are some cases which are recovered
automatically depending on the kind of errors or the states of HVM or LPAR

configurations in a momentary time which the error occurs.

In such a case, recover all LPARs necessary to be recovered and execute LPAR
migration again.

If the automatic recover explained above fails, recover LPARs according to the
procedure in “Solution” below.

Summary of Contents for HVM Navigator V03-06

























































































































































































































































































































Search results

Summary of Contents for HVM Navigator V03-06

Reviews:

Hitachi HVM Navigator V03-06, User Manual, Page: 110 / 312

Search results

Summary of Contents for HVM Navigator V03-06

Reviews: