Hitachi HVM Navigator V03-06, User Manual, Page: 241 / 312

Usage notes 5-9
HVM Navigator User's Guide - Migration
Migration to destination with difference on connection to
storage device
In one of the following cases, it’s necessary that the different values are set
for some items on each EFI driver. The kind of items varies depending on the
case.
The setting items for different values to be set between the EFI driver on the
source server blade and that on the destination server blade are as follows.
(1) Setting of Connection Type
(2) Setting of Data Rate
(3) Setting of Boot Device List
Table 5-3 Different point between source and destination and major
measures
Different point
Measure
(Setting items on EFI driver)
Ports on a storage device which are connected to the server
blade
(3)
Storage devices which are connected to the server blade (2), (3)
Way to connect to a storage device
- connection to storage devices through FC switch module
- connection directly to storage devices)
(1), (3)
For the settings on EFI driver, see Hitachi Compute Blade CB2000 User's Guide,
Hitachi Compute Blade CB320 User's Guide, Hitachi Compute Blade 500 Series
Logical partitioning manager User's Guide, or Hitachi Compute Blade 2500
Series Logical partitioning manager User Guide.