manualshive.com logo in svg

Hitachi H8S/2376 F-ZTAT, Hardware Manual

The Hitachi H8S/2376 F-ZTAT is a cutting-edge microcontroller renowned for its exceptional performance and reliability. Unlock the full potential of this device by accessing the comprehensive Hardware Manual, available for free download at manualshive.com. Get detailed insights and optimize your experience with this exceptional product.

Share
Download
background image

Rev. 1.0, 09/01, page xxxiv of xliv

Figure 15.13   Sample Multiprocessor Serial Reception Flowchart (1) ........................................674
Figure 15.13   Sample Multiprocessor Serial Reception Flowchart (2) ........................................675
Figure 15.14   Data Format in Clocked Synchronous Communication (For LSB-First) ..............676
Figure 15.15   Sample SCI Initialization Flowchart......................................................................677
Figure 15.16   Sample SCI Transmission Operation in Clocked Synchronous Mode ..................679
Figure 15.17   Sample Serial Transmission Flowchart .................................................................680
Figure 15.18   Example of SCI Operation in Reception ...............................................................681
Figure 15.19   Sample Serial Reception Flowchart.......................................................................682
Figure 15.20   Sample Flowchart of Simultaneous Serial Transmit and Receive Operations.......684
Figure 15.21 Schematic Diagram of Smart Card Interface Pin Connections................................685
Figure 15.22   Normal Smart Card Interface Data Format............................................................686
Figure 15.23   Direct Convention (SDIR = SINV = O/

E

 = 0).......................................................686

Figure 15.24   Inverse Convention (SDIR = SINV = O/

E

 = 1).....................................................686

Figure 15.25   Receive Data Sampling Timing in Smart Card Mode

                (Using Clock of 372 Times the Bit Rate)..............................................................688

Figure 15.26   Retransfer Operation in SCI Transmit Mode.........................................................690
Figure 15.27   TEND Flag Generation Timing in Transmission Operation..................................690
Figure 15.28   Example of Transmission Processing Flow ...........................................................691
Figure 15.29   Retransfer Operation in SCI Receive Mode ..........................................................692
Figure 15.30   Example of Reception Processing Flow ................................................................693
Figure 15.31   Timing for Fixing Clock Output Level..................................................................693
Figure 15.32   Clock Halt and Restart Procedure..........................................................................694
Figure 15.33   Block Diagram of IrDA .........................................................................................695
Figure 15.34   IrDA Transmit/Receive Operations .......................................................................696
Figure 15.35   Example of Synchronous Transmission Using DTC .............................................702
Figure 15.36   Sample Flowchart for Mode Transition during Transmission ...............................704
Figure 15.37   Port Pin States during Mode Transition

               (Internal Clock, Asynchronous Transmission).......................................................705

Figure 15.38   Port Pin States during Mode Transition

               (Internal Clock, Synchronous Transmission).........................................................705

Figure 15.39   Sample Flowchart for Mode Transition during Reception ....................................706

Section 16 I

2

C Bus Interface2 (IIC2) (Option)

Figure 16.1   Block Diagram of I

2

C Bus Interface2......................................................................708

Figure 16.2   External Circuit Connections of I/O Pins ................................................................709
Figure 16.3   I

2

C Bus Formats.......................................................................................................720

Figure 16.4   I

2

C Bus Timing........................................................................................................720

Figure 16.5   Master Transmit Mode Operation Timing 1............................................................722
Figure 16.6   Master Transmit Mode Operation Timing 2............................................................722
Figure 16.7   Master Receive Mode Operation Timing 1 .............................................................724
Figure 16.8   Master Receive Mode Operation Timing 2 .............................................................724
Figure 16.9   Slave Transmit Mode Operation Timing 1 ..............................................................726
Figure 16.10   Slave Transmit Mode Operation Timing 2 ............................................................727
Figure 16.11   Slave Receive Mode Operation Timing 1..............................................................728

Summary of Contents for H8S/2376 F-ZTAT






















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for H8S/2376 F-ZTAT

Dave Embedded Systems ARM Cortex-A9 MPCore Quick Start Manual preview
ARM Cortex-A9 MPCore
Brand: Dave Embedded Systems Pages: 67
National Instruments NI 9213 Getting Started preview
NI 9213
Brand: National Instruments Pages: 11
Ubiquiti NanoBeam M5 Setup preview
NanoBeam M5
Brand: Ubiquiti Pages: 3
Klark Teknik DN9650 Operator'S Manual preview
DN9650
Brand: Klark Teknik Pages: 50
National Instruments FieldPoint cFP-RTD-122 Operating Instructions Manual preview
FieldPoint cFP-RTD-122
Brand: National Instruments Pages: 15
UfiSpace S9600-64X Hardware Installation Manual preview
S9600-64X
Brand: UfiSpace Pages: 35
Point of View SmartTV 210 User Manual preview
SmartTV 210
Brand: Point of View Pages: 13
ICP DAS USA PDS-734D Quick Start Manual preview
PDS-734D
Brand: ICP DAS USA Pages: 8
ebm-papst R3G175-AF01-02 Operating Instructions Manual preview
R3G175-AF01-02
Brand: ebm-papst Pages: 11
Paradyne Hotwire 8775 MSDSL Installation Instructions Manual preview
Hotwire 8775 MSDSL
Brand: Paradyne Pages: 10
ZALMAN ZM-2HC2 User Manual preview
ZM-2HC2
Brand: ZALMAN Pages: 8
IEI Technology Mustang-M2AE-MX1 User Manual preview
Mustang-M2AE-MX1
Brand: IEI Technology Pages: 58
ASROCK H670M PRO RS Manual preview
H670M PRO RS
Brand: ASROCK Pages: 173
Rosewill RCX-Z5 User Manual preview
RCX-Z5
Brand: Rosewill Pages: 2
Omron NJ501-1300 User Manual preview
NJ501-1300
Brand: Omron Pages: 432
ETAS ES1392.1 User Manual preview
ES1392.1
Brand: ETAS Pages: 36
AMD -K6-2/450 - MHz Processor Application Note preview
-K6-2/450 - MHz Processor
Brand: AMD Pages: 98
IEI Technology WSB-H610-R11 User Manual preview
WSB-H610-R11
Brand: IEI Technology Pages: 146

Brands by name

Popular brands

Load more brands