Hitachi GD8000 User Manual Download Page 39

Page: 39 / 57

GD8000 User Guide

Customizing Your BIOS

General Dynamics Itronix | 72-0137-003

Field

Setting

Description

Trusted Computing

sub-menu

Configure settings related to Trusted Computing Security

SuperIO Configuration

sub-menu

Configure SuperIO Chipset

Fan Learning Function

sub-menu

Fan calibration (learning) will take about two (2) minutes to finish.

Stealth Mode Configuration

sub-menu

Configuring the stealth mode feature enables you to turn off sound
and light in environments where sound and light could be dangerous or
disruptive

Extended Configuration

sub-menu

Other special function settings including low battery beep, radio wakeup, etc.

CAUTION

Incorrect settings can cause your system to malfunction. To correct mistakes, return to Setup and restore the Setup

Defaults by pressing

Trusted Computing

Trusted Platform Module (TPM) is a secure micro-controller with added cryptographic functions.

Field

Setting

Description

TCG/TPM Support

Yes

Enables Trusted Platform Module (TPM) support. When this item is set to

Yes

new “

Execute TPM Command

” and “

Clearing the TPM

” items appear

on the BIOS Menu.

Execute TPM Command

’

ChANGE

Disabled
Enabled

Enables or Disables the TPM module. TPM must be enabled before TPM
software installation in Windows will start.

Clearing the TPM

Press Enter

Clearing the TPM is the process of returning the TPM to factory defaults. It
is possible the platform owner will change when in the default state so be
sure this is what you wish to do before clearing the TPM.

TPM Enable/Disable Status

Greyed out

This field shows the current status of the TPM module and is not
accessible to the user.

TPM Owner Status

Greyed out

This field shows the current ownership status of the TPM module and is
not accessible to the user.

The Advanced Menu

Summary of Contents for GD8000


























































Search results

Summary of Contents for GD8000

Reviews:

Related manuals for GD8000

Brands by name

Popular brands

Hitachi GD8000, User Manual

Search results

Summary of Contents for GD8000

Reviews:

Related manuals for GD8000

Brands by name

Popular brands