Hitachi GD8000 User Manual Download Page 51

Page: 51 / 57

General Dynamics Itronix | 72-0137-003

GD8000 User Guide

Maintenance and Storage

NOTE

The

Hard Disk Backup and Recovery Utility

is only

available on computers configured with a recovery partition.
If it is not available, you will either need to contact your
company’s help desk about obtaining a recovery CD or return
your unit for service.

Windows XP:

Select

Start, All Programs, Mobile Computer Tools, Hard Disk

Backup and Recovery

and follow the prompts.

Windows Vista:

Select

Start, Control Panel, System and Maintenance

. Then

select

Backup Your Computer.

This will bring you to the

Backup and Restore Center

where you can restore files and

folders. To restore your entire computer select

Windows

Complete PC Backup and Restore Image

. Click on

Restore

Computer

to begin the process.

Windows 7:

Select

Start, Control Panel, System and Security

. Under

Backup and Restore

select

Restore files from backup

then

select

Recover system settings or your computer

Summary of Contents for GD8000


























































Search results

Summary of Contents for GD8000

Reviews:

Related manuals for GD8000

Brands by name

Popular brands

Hitachi GD8000, User Manual

Search results

Summary of Contents for GD8000

Reviews:

Related manuals for GD8000

Brands by name

Popular brands