Hioki ST4030, Instruction Manual, Page: 73 / 256

65
Waveform Judgments
Setting the differential surface area comparison judgment threshold value
(Measurement screen) [MODE] > [SETTING] > [JUDGE] > [DIFF AREA]
2
1
3
1
Tap [LIMIT] .
2
Use the numeric keypad to enter the threshold values.
Settings range: 0.00% to 99.99% (resolution: 0.01%)
OFF
Differential surface area comparison value operations are implemented, but judgments are not.
3
Tap [SET] to confirm.
Setting the differential surface area comparison judgment area
(Measurement screen) [MODE] > [SETTING] > [JUDGE] > [DIFF AREA]

/

Moves 1 point.

/

Moves 100 points.
Judgment area bar
[BEGIN] : Start point
[END] : End point
You can change the
judgment area by dragging
the lines of the start and
end points.
1
1
Set the start and end points for the judgment area.
5
Setting Judgment Conditions