Hioki ST4030, Instruction Manual, Page: 232 / 256

224
Rack Mount
15.3 Rack Mount
The instrument can be mounted to a rack using metal fittings.
Carefully store any parts removed from the instrument for when they are reused.
WARNING
Take the following precautions with the screws used to prevent damage to the
instrument and electric shock.
•
When mounting to a rack, remove the 4 support feet at the base of the
instrument, and secure using the screws (M3 × 10 mm) that secure the support
feet and the screw holes. (Mounting to a collapsible shelf, etc., and screwing
from behind the shelf, etc.)
If the thickness of the collapsible shelf exceeds 4 mm, however, use screws
(M3 × thi6 mm to 10 mm) of length 6 mm to 10 mm when inserted from
the base of the instrument.
Further, if using a JIS rack base and rack mount fittings of the same shape
as described in “Metal fitting dimensions” (p. 225), secure using not only the
screws that secured the support feet, but also countersunk screws of M3 × 8 mm
to 10 mm from the bottom of the metal fittings.
• Use the screws that were used in installation when shipped from the factory
to mount to the rack. If you have lost a screw or find that a screw is damaged,
please contact your authorized Hioki distributor or reseller.