Hioki ST4030, Instruction Manual

Page: 226 / 256

218
Error Display
Display * 1
EXT.I/O
ERR pin
Communications
VCAL status
Meaning
INFORMATION 1013 ON 1 Indicates that voltage calibration was canceled
by the instrument’s interlock function.
INFORMATION 1021 OFF 104 The workpiece’s entire response waveform can
be recorded by either reducing the sampling
frequency or increasing the number of data
points.
For some workpieces, you may encounter
this message even if you use the slowest
sampling frequency and the maximum number
of sampling data points. In such cases, choose
the setting that is best suited to the waveform.
INFORMATION 1022 OFF 105 The workpiece’s entire response waveform can
be recorded by either increasing the sampling
frequency or decreasing the number of data
points. This will allow the measurement time to
be reduced.
*1: If the voltage was calibrated from communications, the window is not displayed.
USB host error
Display Meaning Solution
• USB memory voltage
consumption exceeds 500 mA.
Use another USB memory.
• USB memory format is
incompatible with the
instrument.
Use another USB memory.
• File is corrupt and so cannot be
imported.
• File is not compatible with the
instrument and so cannot be
imported.
Check that the file and USB memory
are not damaged.
• Insufficient USB memory space. Use another USB memory, or
increase the available space.