79
PW3335A985-01
Set and Query
:MEASure?
Output Items
(Instantaneous, Maximum, and Minimum Values for Active Power Data)
Syntax
Instantaneous
value
:MEASure[:NORMal]:ITEM:P:ALL
<Output item>
:MEASure[:NORMal]:ITEM:P:CH1(?)
<Output item>
Maximum
value
:MEASure[:NORMal]:ITEM:P_MAX:ALL
<Output item>
:MEASure[:NORMal]:ITEM:P_MAX:CH1(?)
<Output item>
Minimum
value
:MEASure[:NORMal]:ITEM:P_MIN:ALL
<Output item>
:MEASure[:NORMal]:ITEM:P_MIN:CH1(?)
<Output item>
Response
<Output item (NR1)>
128
64
32
16
8
4
2
1
bit7
bit6
bit5
bit4
bit3
bit2
bit1
bit0
FND
DC
AC
MN
ACDC
Description
Sets the active power data (instantaneous value, maximum value, minimum
value) output items as numerical values between 0 and 31.
For example, specify 1 to output the AC+DC rectification or 2 to output the
AC+DC Umn rectification measurement value.
You can also output all rectification methods together at once. For example, you
can specify 3 to output both the AC+DC rectification and AC+DC Umn
rectification measurement values at the same time.
Although NRf numerical values are accepted, values to the right of the decimal
are dropped.
If no items are specified directly via a
:MEASure?
query, the measurement
values are output based on the specification of this command.
Example
Command
:MEAS:ITEM:P:CH1 1
Specifies to output the instantaneous value of the AC/DC rectified active power.
Query
:MEAS:ITEM:P:CH1?
Response
(When HEADER ON)
:MEASURE:NORMAL:ITEM:P:CH1 1
(When HEADER OFF)
1
Set and Query
:MEASure?
Output Items
(Instantaneous, Maximum, and Minimum Values for Apparent Power Data)
Syntax
Instantane
ous value
:MEASure[:NORMal]:ITEM:S:ALL
<Output item>
:MEASure[:NORMal]:ITEM:S:CH1(?)
<Output item>
Maximum
value
:MEASure[:NORMal]:ITEM:S_MAX:ALL
<Output item>
:MEASure[:NORMal]:ITEM:S_MAX:CH1(?)
<Output item>
Minimum
value
:MEASure[:NORMal]:ITEM:S_MIN:ALL
<Output item>
:MEASure[:NORMal]:ITEM:S_MIN:CH1(?)
<Output item>
Response
<Output item (NR1)>
128
64
32
16
8
4
2
1
bit7
bit6
bit5
bit4
bit3
bit2
bit1
bit0
FND
AC
MN
ACDC
Description
Sets the apparent power data (instantaneous value, maximum value, minimum
value) output items as numerical values between 0 and 23.
For example, specify 1 to output the AC+DC rectification or 2 to output the AC+DC
Umn rectification measurement value.
You can also output all rectification methods together at once. For example, you can
specify 3 to output both the AC+DC rectification and AC+DC Umn rectification
measurement values at the same time.
Although NRf numerical values are accepted, values to the right of the decimal are
dropped.
If no items are specified directly via a
:MEASure?
query, the measurement values
are output based on the specification of this command.
Example
Command
:MEAS:ITEM:S:CH1 1
Specifies to output the instantaneous value of the AC/DC rectified apparent power.
Query
:MEAS:ITEM:S:CH1?
Response
(When HEADER ON)
:MEASURE:NORMAL:ITEM:S:CH1 1
(When HEADER OFF)
1
www.
.com
1.800.561.8187
