Hioki DSM-8104, Instruction Manual

Page: 93 / 132

83
Table 7.3 Setting Control Program Messages 9/10
Mnemonic Description Format
Ｔ Ｈ Ｌ
Histogram display threshold setting
d1 ~ d9: Threshold 1 ~ threshold 9
[Note]
1. d1 to d9 are automatically sorted and can be
set sequence free. d1 > d2 is observed
relative to the screen.
2. Set “0s” where no settings are to be made
such as when setting of d1 to d9 entirely is not
required.
Example: “THL 1E12, 5E11, 1E11, 5E10, 0, 0,
0, 0, 0” [Format]
THL d1, 2d, d3, d4, d5,
d6, d7, d8, d9
d1 ~ d9: NR3 format
Ｔ Ｈ Ｌ ？
Query response of threshold is same as setting. Format]
THL?
[Response]
d1, 2d, d3, d4, d5,
d6, d7, d8, d9
Ｒ Ｈ Ｓ ？ Histogram counter readout
Returns count values of bar graphs divided into
ten and displayed on the screen as responses.
d1 to d2 are output in order of large threshold. [Format]
RHS?
[Response]
d1 ~ d10: NR1 format
Ｃ Ｈ Ｓ Histogram counter clear
Corresponds to operation of [DATA] CLRH YES.
[Format]
CHS
Ｂ Ｓ Ｚ ？
Reads number of data groups in the measured
data buffer. Format]
BSZ?
[Response]
d1: NR1 format
Ｒ Ｂ Ｆ ？
Measured data buffer readout
d1 (Format designation: 0 ~ 1)
0: ASCII format
1: Binary format
All data in the data buffer is output continually
beginning oldest data [Format]
RBF? d1
[Response]
If ASCII
If binary
Binary response data
with length
specification
Ｃ Ｂ Ｆ Measured data buffer clear
Corresponds to operation of [DATA] CLRD ALL [Format]
CBF