Hioki DSM-8104, Instruction Manual

Page: 50 / 132

40
[Note] If a GP-IB address is changed, the status register and mask register will
be initialized. New settings will become necessary.
(6) RS-232 communication condition setting
Set RS-232 communication conditions in “232” items on “PAGE-2/2.”
232 BAUD RS-232C baud rate setting
4800 4800BPS
9600 9600BPS
19200 19200BPS
232 DATA RS-232C character length setting
7- bit length/word
8- bit bit length/word
232 PARI RS-232C parity check setting
NON Parity check not performed
ODD Odd parity check performed
EVE Even parity check performed
232 STOP RS-232C stop bit length setting
1BIT 1 bit
2BIT 2 bits
5.2 Display and Processing of Measured Value
5.2.1 Displaying measured value
Measured values are displayed on the Measured Value Display screen, to display
measured results and measuring conditions. As shown in Fig. 5.3, the Measured Value
Display screen is split into the Regular Measurement screen and Sequential
Measurement Monitoring screen.
(1) Regular Measurement screen
A measured value is displayed in the top part of the screen in large characters.
Measured values are always results of most recent measurement.
Measuring conditions that are currently set are displayed under a measured
value.
Side marks are displayed on both sides of the screen indicating measurement
and key statuses.
Functions of the function keys are displayed in the bottom.
(2) Sequential Measurement Monitoring screen
In addition to the Regular Measurement screen, the Sequential Measurement
Monitoring screen allows monitoring of the progress of each sequence.
The Sequence Monitoring screen counts down the following items as the
sequences advance, enabling viewing of sequence progresses at a glance.