Hioki DSM-8104, Instruction Manual

Page: 78 / 132

68
(3) Format with comparison result only
ｄ
Ｌ
Ｆ
<EOI>
① ②
①
Comparison result
The details are the same as those for the basic format.
②
Delimiter
The details are the same as those for the basic format.
(4) No data return
Specifying this format will return data as a trigger response. This format is
used for storing data in the data buffer temporarily and reading it in batch.
Data separator
Two data fields are separated by one comma “,.”
7.4 Response to Query Program Message
Responses to query program messages are made in the following formats: NR1, NR2,
NR3, any ASCII character string format and binary format with a specified length. See
Table 7.3 List of Program Messages when deciding which format will be used.
NR1 format
Data strings: Integers (Mainly setting type and status)
NR1 format
Data strings: Integers (Mainly setting type and status)
－ ｄ ｄ ｄ ｄ ｄ
Ｌ
Ｆ
＜ Ｅ Ｏ Ｉ ＞
NR2 format
Data strings: Number of fixed decimal points (Mainly set values)
－ ｄ ｄ ｄ ． ｄ
Ｌ
Ｆ
＜ Ｅ Ｏ Ｉ ＞
NR3 format
Data strings: Number of floating decimal points (Mainly set and measured values)
±ｄ ． ｄ ｄ ｄ ｄ Ｅ ±ｄ ｄ
Ｌ
Ｆ
＜ Ｅ Ｏ Ｉ ＞
ASCII character string format
Data strings: Random ASCII character strings (Mainly equipment IDs)
Ｘ Ｘ Ｘ Ｘ Ｘ Ｘ Ｘ Ｘ Ｘ Ｘ Ｘ
Ｌ
Ｆ
＜ Ｅ Ｏ Ｉ ＞
“X” denotes an ASCII character
Binary format with a specified length (Used in data buffer readout)
＃ ４ ｎ ｎ ｎ ｎ ｂ ｂ ｂ ｂ ｂ ・ ・ ・ ・
Ｌ
Ｆ
<EOI>
① ② ③ ④ ⑤
①
Indicates binary format.