Hioki DSM-8104, Instruction Manual

Page: 87 / 132

77
Table 7.3 Setting Control Program Messages 3/10
Mnemonic Description Format
Ｄ Ｌ Ｙ Trigger delay time (ms) setting
d1 (Time: 0 ~ 9999) [Format]
DLY d1
d1: NR1 format
Ｄ Ｌ Ｙ ？
Query response on trigger delay time is same as
setting. [Format]
DLY?
[Response]
d1
Ａ Ｖ Ｅ
Averaging setting
d1 (Selection: 0 ~ 1)
0: OFF (Not done)
1: ON (Done)
[Format]
AVE d1
d1: NR1 format
Ａ Ｖ Ｅ ？
Query response in averaging is same as setting. [Format]
AVE?
[Response]
d1
Ｓ Ｐ Ｌ
Integral time setting (Unit, set values)
d1 (Unit: 0 ~ 1)
0: PLC
1: ms
d2 (Set value)
PLC: 1 ~ 15
ms: 2 ~ 300 [Format]
SPL d1, d2
d1: NR1 format
d2: NR1 format
Ｓ Ｐ Ｌ ？ Query response on setting number of integral
time (unit, set value) is same as setting. [Format]
SPL?
[Response]
d1, d2
Ｒ Ｎ Ｇ
Current range setting
d1 (AUTO/HOLD Selection: 0 ~ 1)
0: HOLD
1: AUTO
d2 (Range during HOLD: 0 ~ 7)
0: 10
μ F(Range 1) 4: 1nF(Range 5)
1: 1 μ F(Range 2) 5: 100pF(Range 6)
2: 100nF(Range 3) 6: 10pF(Range 7)
3: 10nF(Range 4)
7: 10pF(Range 8)
Capacity of integrating capacity is set in range
changeover
[Format]
RNG d1, d2
d1: NR1 format
d2: NR1 format
Ｒ Ｎ Ｇ ？
Query response on current range is same as
setting. [Format]
RNG?
[Response]
d1, d2