Hioki DSM-8104, Instruction Manual

Page: 109 / 132

99
Table 7.7 Error Register
Bit No. and Name Event/status indicated when bit is true
ｂｉｔ７： Not used
ｂｉｔ６：ＭＬＥ
Message length error
Set when the length of a message exceeds a
permissible range.
Reset by reading this register.
ｂｉｔ５：ＨＤＥ
Message header error
Set when a message header that cannot be
recognized is received.
Reset after reading this register.
ｂｉｔ４：ＤＦＥ
Data format error
The number of parameters has exceeded a
specified number.
There are parameters that cannot be recognized.
Reset by reading this register.
ｂｉｔ３：ＤＲＥ
Data range error
Set when a parameter value is outside specified
range.
Reset by reading this register.
ｂｉｔ２：ＣＮＥ
A cannot-execute command
Set when a command that cannot be executed is
received.
Reset by reading this register.
ｂｉｔ１：ＩＳＥ
Internal communication error
Set when an internal communication error is found.
Reset by reading this register.
ｂｉｔ０：ＢＤＥ Environmental data destruction
Set when data of a backup RAM is destroyed.
Reset by reading this register.