Hioki DSM-8104, Instruction Manual

Page: 54 / 132

44
OFF: Deviation is not displayed.
DEV: Displays (measured value - reference value).
PAR: Displays (measured value - reference value) x 100/reference value (%).
(3) Reference value setting
Select “REF” by operating the [ ▲ ] and [ ▼ ] keys and input a reference value to
be set by keying the numeric input keys.
p.42 Press the [ENTER] key to set the input reference value.
(4) End setting
Press the [ENTER] key to finish setting and to return to the measurement
screen.
[Notice]
Deviation is displayed only on the screen and normal measured values are
output to the interface.
5.2.4 Creating histogram
This function is enabled in manual trigger, external trigger and sequential measurement.
This function cannot be used in the Internal Trigger mode.
(1) Press the [DATA] (MEASURED RESULT DATA) key.
Pressing the key changes the screen to the screen to select a function for
totaling (histogram data counter, measured data buffer). (See Fig. 5.14)
This screen is for condition setting for histogram creation, data buffer display
and data buffer clear.
Select an item to be executed by operating the function key. Selecting an item
changes the screen to the execution screen.
９．９９９９Ｅ＋９９Ω
Ｍ Ｅ Ｓ ． Ｖ ： １ ０ ０ ． ０ Ｖ Ａ Ｖ Ｅ ： Ｏ Ｎ
Ｓ Ａ Ｍ Ｐ Ｌ ： ３ ０ ０ ｍ Ｓ Ｓ Ｅ Ｑ ： Ｏ Ｆ Ｆ ： ０
Ｄ Ｅ Ｌ Ａ Ｙ ： ０ ｍ Ｓ Ｒ Ａ Ｎ Ｇ Ｅ ： Ａ Ｕ Ｔ Ｏ １
Ｈ Ｉ Ｓ Ｔ Ｓ Ｅ Ｔ Ｈ Ｃ Ｌ Ｒ Ｈ Ｃ Ｌ Ｒ Ｄ Ｒ Ｏ Ｌ Ｌ
Fig. 5.14 Function Selection Screen
Press the [ENTER] key on this Function Select screen to return to the
Measurement screen.
(2) Histogram threshold setting
Press [SETH] (SET HISTOGRAM) on the Function Select screen.
The screen changes to the screen for setting nine thresholds for creating a
histogram.