ENGINE INTRODUCTION (J08E)
EN01–23
(3)
For tube-type liquid gasket, required width of application can be
obtained by cutting the nozzle to suit.
4.
PARTS AND POSITIONS FOR LIQUID GASKET.
(1)
Apply liquid gasket to positions and types of gasket according to the
table shown below.
Follow the application pattern at each position shown in the figures.
Unit: mm {in.}
SHTS011060100033
1: Approximately 2 mm wide when cut at the first step
2: Approximately 5 mm wide when cut at the second step
No.
Part name
Application position and pattern
Application
width
Gasket
to be
used
Remarks
1
Oil seal retainer
Matching flange face with the block
1.5-2.5
{0.0591-
0.0984}
Black
2
Coolant pump
Matching flange face with the block
1.5-2.5
{0.0591-
0.0984}
Black
3
Oil cooler
Matching flange face with the block
1.5-2.5
{0.0591-
0.0984}
Silver
4
Thermostat case
Matching flange face with the cylinder head
1.5-2.5
{0.0591-
0.0984}
Silver
