ENGINE MECHANICAL (J08E)
EN02–59
Clearance between pis-
ton pin and connecting
rod bushing
0.035-0.056
{0.0014-0.0022}
0.08 {0.0031}
Replace piston pin
and/or connecting
rod bushing.
—
Wear or damage of con-
necting rod
*Dye penetrant check
(Color check)
—
—
Replace.
Visual check
Clogging of connecting
rod oil hole
—
—
Replace.
Visual check
Crank pin outside diam-
eter
65 {2.559}
More than
0.2 {0.0079}
(Repair)
Regrind under size.
Measure
64.3 {2.5314}
(Service)
Replace crankshaft.
Clearance between con-
necting rod bearing and
crankpin
0.031-0.082
{0.0013-0.0032}
0.2 {0.0079}
Replace connecting
rod bearing.
Connecting rod large
end width
34
{1.339}
33.2 {1.3071}
Replace connecting
rod.
Measure
Crankpin width
34
{1.339}
34.8 {1.371}
Replace crankshaft.
Connecting rod end play
0.20-0.52
{0.0079-0.0204}
1.0 {0.0394}
Replace connecting
rod and/or crank-
shaft.
Crank journal outside
diameter
80 {3.150}
More than
0.2 {0.0079}
(Repair)
Regrind under size.
Measure
79.3 {3.1220}
(Service)
Replace crankshaft.
Clearance between
crank journal and main
bearing
0.051-0.102
{0.0021-0.0040}
0.2 {0.0079}
Replace main bear-
ing.
Inspection item
Standard
Limit
Remedy
Inspection procedure
90
measure
2 part
90