FUEL SYSTEM (J08E)
EN07–19
(3)
Tighten the injection pipe nuts to the specified torque.
Tightening Torque:
44 N
m {450 kgf
cm, 32.5 lbf
ft}
! CAUTION
•
While working, be careful not to make dirt and water enter parts.
•
Before mounting a part, check that there is no dirt on the con-
nection between the parts.
•
Air enters the fuel pipe while working. After working, be sure to
purge air.
NOTICE
When installing the fuel injection pipe, do not misassemble the 2010
model fuel injection pipe.
(4)
Fit the clips (6 pcs) and fix the injection pipe.
(5)
Tighten the pressure feeding pipe nuts to the specified torque.
(6)
Fit the clips (2 pcs) and fix the pressure feeding pipe.
Tightening Torque:
44 N
m {450 kgf
cm, 32.5 lbf
ft}
! CAUTION
•
While working, be careful not to make dirt and water enter parts.
•
Before mounting a part, check that there is no dirt on the con-
nection between the parts.
•
Air enters the fuel pipe while working. After working, be sure to
purge air.
SAPH011060700043
2014 ~ 2011 Model
2010 Model
(1-6)
(1-6)
SAPH011060700044
Fuel injection pipe
2014 ~ 2011 Model
(J08E-VB, VC)
2010 Model
(J08E-TV, TW)
No.1 injector
1B
1A
No.2 injector
2B
2A
No.3 injector
3B
3A
No.4 injector
4B
4A
No.5 injector
5B
5A
No.6 injector
6B
6A
SAPH011060700045
Air compressor
SAPH011060700046
