Hino Motors J08E-VC, Workshop Manual, Page: 52 / 339

ENGINE MECHANICAL (J08E) EN02–3
Tightening torque Unit: N

m {kgf

cm, lbf

ft}
#=Apply oil to the threads and seat surfaces before tightening.
1 Oil filler cap 18 Valve rocker shaft
2 Cylinder head cover 19 Camshaft bearing cap
3 Silent block 20 Camshaft gear
4 Heater plug 21 Camshaft
5 Head cover gasket 22 Nut
6 Union bolt 23 Plate
7 Gasket 24 Injection pipe oil seal
8 Leakage pipe 25 Injector
9 Injector clamp bolt 26 O-ring
10 Rocker arm support bolt 27 Camshaft housing
11 Rocker arm assembly 28 Camshaft housing gasket
12 Lock nut 29 Camshaft bearing
13 Adjust screw 30 Plug
14 Rocker arm support 31 Cylinder head assembly
15 Rocker arm 32 Cylinder head gasket
16 Injector clamp 33 Harness assy
17 Collar
A 28.5 {290, 21} G 12.3 {126, 9}
B 31 {320, 23} H 28.5 {290, 21}
C 31 {320, 23} I 59 {600, 43.4}+90

+90

#
D 59 {600, 43.4}+90

# J 25 {250, 18.1}
E 25 {250, 18.1} K 6 {60, 4.3}
F 59 {600, 43.4} L 25 {250, 18.1}