EXHAUST SYSTEM (J08E)
EN04–3
DISMOUNTING AND MOUNTING
EN0110604H100001
IMPORTANT POINT - MOUNTING
1.
INSTALL THE EXHAUST MANIFOLD GASKET.
NOTICE
Since the exhaust manifold gasket must be installed in one way,
install the gasket with the black side facing toward the exhaust mani-
fold.
2.
INSTALL THE EXHAUST MANIFOLD.
(1)
Install the exhaust manifold onto the cylinder head and tighten the
mounting nut in the order shown in the figure to the specified torque.
Tightening Torque:
65 N
m {660 kgf
cm, 48 lbf
ft}
(2)
Retighten the same nuts according to the same procedure again.
NOTICE
Be sure to carry out the procedure.
SAPH011060400002
8 7
18 17
16 15
14 13
12 11
10 9
1
2
6
5
4
3
Tightening order .... New manifold
Tightening order .... Reused manifold
8
7
18
17
16
15
14
13
12
11
10
9
1
2
6
5
4
3
Spacer
SAPH011060400003
