FUEL SYSTEM (J08E)
EN07–32
2.
DRAIN WATER
(1)
Connect specific tube to drain outlet.
To protect steering joint by draining liquids. Specific tube is available
at HINO dealer. (Part No. SZ950-61502)
(2)
Loose the vent cap and after open drain valve.
(3)
Collect water in to cup.
(4)
Allow any water to drain out, then close the drain valve and vent cap.
(Drain minimum amount of fuel possible)
(5)
Remove the drain plug of the bubble separator.
(6)
Loosen the bleeder plug of the bubble separator.
(7)
Drain until no more water comes out.
(8)
Tighten the drain plug and the bleeder plug of the bubble separator.
Tightening Torque:
Drain plug: 5.9-7.9 N
m {60.2-80.5 kgf
cm, 4.4-5.8 lbf
ft}
Bleeder plug: 5-8.8 N
m {51-89.7 kgf
cm, 3.7-6.5 lbf
ft}
Vent cap
Drain
valve
SAPH011060700071
Bleeder plug
Drain plug
SAPH01Z080700003
