26
Hill-Rom® P500 Therapy Surface User Manual (158251 REV 3)
WARNING:
Make sure the straps are through the sleep deck only. Failure to
do so could cause the bed not to articulate as intended. Injury or
equipment damage could occur.
•
You put the surface straps through the sleep deck only and not
through or around any bed frame areas that would prevent the
bed from articulating.
•
If the bed frame has footboard controls, you install the control
unit so that you can view and get access to the footboard
controls. To adjust the hangers on the control unit, do as
follows:
a.
Pull the hangers out from the
unit to the applicable width.
b.
Turn the hanger hooks so the
arrows on the brackets align.
c.
Pull the hooks up from the
brackets, and adjust the
height as necessary.
NOTE:
There are two extension lengths.
