20
Hill-Rom® P500 Therapy Surface User Manual (158251 REV 3)
Comfort Adjust
The system automatically supplies the pressure redistribution for the
occupant’s weight and the head angle of the bed. To change the level of
air pressure in the head, seat, and foot sections, use the Comfort Adjust
controls.
There are five pressure levels: softer, soft,
normal, firm, and firmer. The default
pressure level is normal.
Increase or Decrease Pressure
1.
Press one of the
Up
or
Down
arrows
to engage the feature.
2.
Press the section
Up
or
Down
arrow
until you reach the applicable pressure level.
When you set the Comfort Adjust levels, the settings will stay at those
levels in the Normal and Sleep modes until you change the settings or
the surface is reset for a new occupant.
Surface Modes
Normal
Normal mode causes the air pressure in the surface sections to adjust
according to the occupant’s weight and the surface head angle.
When the system is turned on, it automatically goes into Normal mode.
If the system is another mode, and you want the surface to
return to Normal mode, press the
Normal
control until its
indicator stays on.
