Hill-Rom® P500 Therapy Surface User Manual (158251 REV 3)
25
CAUTION:
The sharp edges of an x-ray cassette can damage the surface.
Use care when you use an x-ray cassette with the surface.
2.
Put the x-ray cassette in a pillow case.
3.
Put the pillow case-covered x-ray cassette into the cassette sleeve.
When the cassette sleeve is not in use, keep the sleeve openings closed.
Hose Assembly Features and Use
The hose assembly connects the control unit to
the surface.
To help keep the hose assembly off the floor, a
hose hanger is on the hose assembly and can
be attached to one of the hooks on the bottom
of the control unit.
Install the P500
1.
For detailed instructions on how to install the P500, refer to “Unit
Setup” in the
P500 Therapy Surface Service Manual
(158824).
2.
When you set up the P500, make sure of these:
•
The bed frame is compatible for the P500. Refer to “Bed
Frames” on page 31.
WARNING:
Failure to make sure the siderails operate correctly
before
you
put an occupant on the surface could cause injury.
•
The siderails raise, lock into position, and lower correctly (as
applicable).
