manualshive.com logo in svg

Hill-Rom DuraStar Series, Service Manual

Share
Download
Hill-Rom DuraStar Series Service Manual Download Page 3

Revisions

Page ii

DuraStar™ Series Stretcher Service Manual (man268)

 

1999 by Hill-Rom Company, Inc. ALL RIGHTS RESERVED.

No part of this text shall be reproduced or transmitted in any form or by any 
means, electronic or mechanical, including photocopying, recording, or by any 
information or retrieval system without written permission from Hill-Rom, 
Company, Inc. (Hill-Rom).

First Printing 1999

Printed in the USA

Allen™ is a trademark of Industrial Fasteners, Inc.

Bulbex® is a registered trademark of Industrial Machinery Company.

Comfortline® is a registered trademark of Hill-Rom, Inc.

DuraStar™

 

is a trademark of Hill-Rom, Inc.

Hill-Rom® is a registered trademark of Hill-Rom, Inc.

Lectrolite®

 

is a registered trademark of Herculite Products, Inc.

Loctite®

 

is a registered trademark of Loctite Corporation.

Oilite® is a registered trademark of Beemer Precision, Incorporated.

Torx® is a registered trademark of Textron, Inc.

Velcro®

 

is a registered trademark of Velcro Industries, BV (a Dutch 

corporation).

The information contained in this manual is subject to change without notice. 
Hill-Rom makes no commitment to update or keep current, the information 
contained in this manual.

The only product warranty intended by Hill-Rom is the express, written 
warranty accompanying the bill of sale to the original purchaser. Hill-Rom 
makes no other warranty, express or implied, and in particular, makes no 
warranty of merchantability or fitness for a particular purpose.

Additional copies of this manual can be obtained from Hill-Rom.

To order additional copies of this manual, call (800) 445-3720, and place a 
parts order for part number man268.

Summary of Contents for DuraStar Series






































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands