manualshive.com logo in svg

HIKVISION DS-PHA20-M, User Manual, Page: 99 / 127

Share
Download
HIKVISION DS-PHA20-M User Manual Download Page 99

Click   to enter the zone operation page. You can Bypass and Bypass Recovered the selected

zones here.

5.5.4 Operate the Relay

In the client software, click Security Control Panel → Relay to enter the page. You can Enable or

Close the selected relays.

Figure 5-6 Relay Operation

5.5.5 Operate the Sounder

Steps

1. In the client software, click Security Control Panel → Sounder to enter the page.

2. You can Enable or Close the selected sounders.

5.6 Use the Web Client

Steps

1. Connect the device to the Ethernet.

2. Search the device IP address via the client software and the SADP software.

3. Enter the searched IP address in the address bar.

Note

When using mobile browser, the default IP Address is 192.168.8.1. The device must be in the AP

mode.

Note

When connecting the network cable with computer directly, the default IP Address is 192.0.0.64

Hybrid Security Control Panel User Manual

91

Summary of Contents for DS-PHA20-M
































































































































Reviews:

No comments