manualshive.com logo in svg

HIKVISION DS-PHA20-M, User Manual, Page: 31 / 127

Share
Download
HIKVISION DS-PHA20-M User Manual Download Page 31

The device will push notifications when tampering alarm of the control is triggered or

restored.

Panic Alarm Notification

The device will push notifications when panic alarm on keypads or keyfobs is triggered or

restored by keypads or keyfobs.

Medical Alarm Notification

The device will push notifications when medical alarm on keypads is triggered.

Fire Alarm Notification

The device will push notifications when fire alarm on keypads is triggered or a user presses

the fire alarm key on the keypad.

Panel Management Notification

The device will push notifications when the user operate the control panel.

Control Panel System Status Notification

The device will push notifications when the control panel system status is changed.

Detector Status Notification

The device will push notifications when any detector status is changed.

Device Status Alarm Notification

The device will push notifications when any device status is changed.

Smart Alarm Event

The device will push notifications when alarm is triggered in network cameras.

4. Optional: For Alarm Receiver Center, you need to select center number before settings.

5. Optional: If you want to send the alarm notifications to the mobile client, you should set Mobile

Phone parameters.

Hybrid Security Control Panel User Manual

23

Summary of Contents for DS-PHA20-M
































































































































Reviews:

No comments