HIKVISION DS-PHA20-M, User Manual, Page: 46 / 127

Note
After configurated, you can check the company name and phone number on the keypad LCD
screen.
8. Click OK.
Module
The wired module is connected to the control panel via RS-485 wiring. You can refer to the Hybrid
Control Panel Quick Start Guide for details.
Steps
1. In the client software, select the device on the Device Management page and click , or enter
the device IP address in the address bar of the web browser and log in.
2. Click Configuration → Device Management → Module Information to enter the page.
3. Select the Module Type.
4. Click to enter the module settings page.
5. Set the module name.
6. Click OK.
7. Optional: Click to delete the module.
4.2.3 Area Settings
Basic Settings
You can link zones to the selected area.
Steps
1. In the client software, select the device on the Device Management page and click , or enter
the device IP address in the address bar of the web browser and log in.
2. Click Configuration → Area Management → Basic Settings to enter the page.
Hybrid Security Control Panel User Manual
38