HIKVISION DS-PHA20-M, User Manual, Page: 77 / 127

Figure 4-44 Add User
4. Select User Type. Enter User Name and Password.
5. Enter Keypad Password.
Note
The keypad pa1 or -1 is the duress code. Use the duress code can operate the keyboard
to arm and disarm normally and upload a duress alarm. For example, if the keypad password is
123456, the duress code is 123455 or 123457.
6. Tap Add to add the user.
7. Optional: Tap a user to edit the parameters. You can choose to enable the user or not. Select
the linked area and the permission.
8. Optional: Tap a user and tap Delete to delete the user.
Note
Admin, installer and mabufacturer can not be deleted.
4.3.8 System Settings
System Option
On the device list page, tap the security control panel and then log in to the device (if required) to
enter the control panel page.
Tap → System Option to set parameters.
For Option Management:
Hybrid Security Control Panel User Manual
69